www.militaar.net

The barrel, trunion, bolt, and bolt carrier are ak-47. The receiver is scratch built form 1 1/2' by 2' retangular steel tubing. The bolt carrier has a piece welded on the back of it for a m_60 return spring to connect to. The weld piece aslo has a slot machined into the bottom for an extended FAL hammer to swing into to stike a spring retun extended ak firing pin. On top of the welded piece is mounted a roller that rided in the feed cam slot of aMG-3 top cover/feed mechanism. The gas tube is made out of a 12 ga barrel section and a larger gas piston is silver soldered to the originial ak gas piston to give the bolt carrier extra push to operate the beltfeed. The belt is MG3 which holds the 7.62x39 cartridge not as tight as a RPD belt. The gas relief holes in the gas tube are drilled at the end of the gas piston stroke to make the system a long stroke piston, again to give the bolt carrier extra push to operate the feed mechanim. It ejects down low to the left and the ejected cartridges just miss the SAW-249 50 round cloth cartridge bag. Rear sight is K98. There is a front barrel extension fitte to the ak barrel to keep the pressure up longer inorder to aid in operating the feed mechanim. The butt stock, pistol grip assy and the forearm are scratch built. The fcg is FAL. Flash hider is L1A1. The gas port is drilled out to .187 dia. The bi-pod is import RPK style. The feed tray is alto scratch built.

madiss kirjutas:RPG-7 + miin

alari kirjutas:Ukraina teemast jooksis läbi video, kus terroristid neid asju lasid. Praegu ei leia seda üles.

madiss kirjutas:

alari kirjutas:Ukraina teemast jooksis läbi video, kus terroristid neid asju lasid. Praegu ei leia seda üles.

https://www.youtube.com/watch?v=CAAOY1FQk00

sammal.habe kirjutas: Keegi ehk oskab kommneteerida, mis junn see täpsemalt on, midagi lennumasina küljest?